Industrial Applications
ROBAN 2.2 Advanced B is a supervised teaching/research configuration. Adds Orin NX 117 TOPS, Gemini 335 depth and Mid-360S lidar; two-finger grippers. Nominal mass 39±4 kg is not the older 42 kg family figure.
This editorial assessment concerns industrial buyer readiness. It is not an independent performance test.
| EU regulatory fit | Unknown |
|---|---|
| Cybersecurity fit | Unknown |
| Serviceability fit | Unknown |
| Supply chain fit | Unknown |
Manipulation and Perception
23-joint body (2 head, 4 per arm, 1 waist, 6 per leg). Two 1-DOF grippers →25 total; gripper travel≥133 mm, open/close≤0.6 s, mass≤500 g each. Endpoint load≥1 kg lacks a maximum/reach curve, so core payload remains unknown.
RK3588, programmable LED and voice tools. Orin NX 117 TOPS, Gemini 335 with IMU and Mid-360S navigation. No universal model-service offline guarantee.
SDK and Integration
Current Roban 2.2 uses a C++17 DDS SDK; educational Python tools are separate.
| API type | Current Roban 2.2 C++17 API over Cyclone DDS |
|---|---|
| Languages | C++17 SDK, Python educational tools, Graphical programming |
| ROS support | Current SDK expressly does not use ROS1, catkin or rosbridge. Hand-component ROS support is separate. |
| Simulation | MuJoCo with Lejulab_ARM; prebuilt binaries require matching Linux architecture and robot version17. |
| Offline operation | Local DDS and MuJoCo documented; speech/model service offline scope unknown. |
| Teleoperation | Controller and version-matched VR API; VR hardware may be optional. |
| Software updates | Versioned developer package; release access, firmware and long-term update entitlement require confirmation. |
| Documentation | Open documentation |
| Integration constraints | Use actual motor names/order and robot version. SDK public headers do not include verified camera/lidar or legacy speech/FK/IK APIs. Secure local test area and operator required. |
Safety Notes
No exact-model conformity dossier or certified collaborative operating envelope verified. Emergency-stop hardware and manufacturer demonstrations do not establish safe unrestricted shared work. Roban manual requires lifting support during enabling and local supervision; powered-down joints unlock.
Compliance and Certificates
| Standard | Status | Jurisdiction | Evidence |
|---|---|---|---|
| CE marking | Unknown | European Union | Distributor promises a supplied DoC; exact-model declaration not inspected. |
Commercial Readiness
| Pricing | No current exact-edition price verified; request a configuration-specific quote. Historical family average selling prices are not a unit list price. |
|---|---|
| Price range | Quote-based or unverified |
| Lead time | Needs verification |
| Availability regions | China; present quotation required, Europe: distributor-stated Leju range, exact edition subject to quote |
| Spare parts | Distributor claims European batteries/common spares; exact Leju model inventory and replenishment lead time not independently verified. |
| Warranty | No uniform manufacturer warranty duration, exclusions or cross-border repair cost established for these models. Obtain edition-specific written terms. |
| Configuration and pricing basis | Exact configuration quotation required |
| Distributors and service | Robot Distribution advertises Leju supply, European service and training; no per-edition authorisation or stock verification. |
No price, stock or lead time inferred from generic family offers.
Specifications
| Height | 1240 mm |
|---|---|
| Weight | Unknown |
| Payload | Unknown |
| Runtime | Unknown |
| Battery and runtime conditions | Hot-swap support in family matrix; current 2.2 unboxing shows two rear battery slots. Pack voltage/capacity, charge time and task runtime unverified. |
| Degrees of freedom | 25 |
| Max speed | Unknown |
| Joints and end-effectors | 23-joint body (2 head, 4 per arm, 1 waist, 6 per leg). Two 1-DOF grippers →25 total; gripper travel≥133 mm, open/close≤0.6 s, mass≤500 g each. Endpoint load≥1 kg lacks a maximum/reach curve, so core payload remains unknown. Source ↗ |
| Dimensions and tolerance | 1240×430×160 mm (±20 mm), 1160 mm span excluding end-effectors; 39 kg±4 kg. Nominal toleranced mass is recorded here rather than a precise scalar. Source ↗ |
| Edition equipment | RK3588, programmable LED and voice tools. Orin NX 117 TOPS, Gemini 335 with IMU and Mid-360S navigation. No universal model-service offline guarantee. Source ↗ |
| Battery scope | Hot-swap support in family matrix; current 2.2 unboxing shows two rear battery slots. Pack voltage/capacity, charge time and task runtime unverified. Source ↗ |
Sources and Further Reading
-
ROBAN 2.2 Advanced B product manual ↗
Leju Robotics · Accessed Nov 2, 2026
Full article inspected. Current 2.2 product chapters specify 1240×430×160 mm ±20, mass 39±4 kg, arm endpoint load ≥1 kg. SDK is C++17 with Cyclone DDS and prebuilt architecture-matched Linux Lejulab_ARM, robot version17; no ROS1 or legacy Python SDK assumed. Educational graphical/Python tools are a separate interface. Safety procedure requires lifting support and local supervision.
-
ROBAN 2.2 C++ SDK introduction ↗
Leju Robotics · Accessed Nov 2, 2026
Full article inspected. Current 2.2 product chapters specify 1240×430×160 mm ±20, mass 39±4 kg, arm endpoint load ≥1 kg. SDK is C++17 with Cyclone DDS and prebuilt architecture-matched Linux Lejulab_ARM, robot version17; no ROS1 or legacy Python SDK assumed. Educational graphical/Python tools are a separate interface. Safety procedure requires lifting support and local supervision.
-
ROBAN 2.2 MuJoCo simulation ↗
Leju Robotics · Accessed Nov 2, 2026
Full article inspected. Current 2.2 product chapters specify 1240×430×160 mm ±20, mass 39±4 kg, arm endpoint load ≥1 kg. SDK is C++17 with Cyclone DDS and prebuilt architecture-matched Linux Lejulab_ARM, robot version17; no ROS1 or legacy Python SDK assumed. Educational graphical/Python tools are a separate interface. Safety procedure requires lifting support and local supervision.
-
ROBAN 2 current product and edition matrix ↗
Leju Robotics · Accessed Nov 2, 2026
All 17 panels visually inspected. Final matrix: Smart/Lingdong 23 DOF passive hands, no lidar/camera/Orin/navigation; Advanced A 23 DOF passive hands, B 25 with grippers, C 45 with dexterous hands. All RK3588/hot swap/development; Advanced adds 117 TOPS, depth, lidar and navigation. Family marketing is not universal edition equipment.
-
ROBAN SDK architecture ↗
Leju Robotics · Accessed Nov 2, 2026
Full article inspected. Current 2.2 product chapters specify 1240×430×160 mm ±20, mass 39±4 kg, arm endpoint load ≥1 kg. SDK is C++17 with Cyclone DDS and prebuilt architecture-matched Linux Lejulab_ARM, robot version17; no ROS1 or legacy Python SDK assumed. Educational graphical/Python tools are a separate interface. Safety procedure requires lifting support and local supervision.
-
ROBAN unboxing and emergency-stop procedure ↗
Leju Robotics · Accessed Nov 2, 2026
Full article inspected. Current 2.2 product chapters specify 1240×430×160 mm ±20, mass 39±4 kg, arm endpoint load ≥1 kg. SDK is C++17 with Cyclone DDS and prebuilt architecture-matched Linux Lejulab_ARM, robot version17; no ROS1 or legacy Python SDK assumed. Educational graphical/Python tools are a separate interface. Safety procedure requires lifting support and local supervision.
-
Leju range, parts and service in Europe ↗
Robot Distribution · Published Oct 29, 2026 · Accessed Nov 2, 2026
Distributor states European sales/rental/RaaS, parts, repair, training and supplied DoC. Model listings say on order. These are distributor claims; exact manufacturer authorisation, physical stock, signed declarations and repair SLA not independently established.
-
Lejoin Intelligence ChiNext IPO draft prospectus ↗
Lejoin Intelligence / Shenzhen Stock Exchange · Published May 19, 2026 · Accessed Nov 2, 2026
446-page primary filing inspected: legal identity and conversion p46, controllers p65, funding/financial overview pp23–34, historical product tables pp117–119, business/customer and quality/service disclosures. Proposed IPO and CNY2.6bn fundraising are not a completed listing or cash raised. 2025 revenue CNY258.1879m; Kuavo family revenue CNY177.7826m. Historical 5-W 200cm/156kg/40 DOF differs from current product/manual 220cm/245kg/36 DOF.